[01:14] QueTwo (i=DaStuff@216.157.195.85) joined #openser. [01:15] hey everybody [01:29] L-info (n=Adam@g0962184.demon.co.uk) joined #openser. [01:34] howdie [01:36] hows it goin? [01:36] i'm alive - pissed off, but alive [01:37] all we can hope for [01:38] How are people doing CDR/EDR/Billing with SER? [01:38] I mean.. what's the norm for high-valume call platforms? [01:41] i do all my CDR off my PBX.. [01:42] hey, can somebody help me with some setup questions... [01:44] my current setup is as follows : [01:44] Avaya TN2602 -> Avaya SIP Enablement Server -> Firewall -> Users [01:44] but our firewall is not capable of re-writing the SIP headers/body to properly map the users to the correct RECORD-PATH [01:45] would SER / OpenSER be able to help me with this? essentially put a box with two NICs that can do the translation? [01:46] SER/OpenSER can do accounting but there are major problems [01:47] you should be doing accounting at the media level [01:47] meaning whavever 'device' you have processing your media should provide the call detail [02:13] QueTwo, yes from what you've said, openser should be able to help you [02:19] are there any configurations out there that show openser as an SBC? i think that is more what i am looking for [02:21] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: "Leaving" [02:34] ser only deals with SIP [02:35] some other process/device has to deal with the media [02:43] that shuldn't be a problem. the Avaya has a 1:1 mapping on the firewall. as long as i can embed the correct IP addresses of my media cards in the SIP packets, i will be ok [03:06] again SIP only deals with SIP [03:07] you will have to figure out how to munge the SDP [03:07] er SER only deals with SIP [03:08] nod [03:08] i just wish this Juniper router would do what it is advertised to do [03:09] then i wouldn't have to go through all this mess [03:23] QueTwo (i=DaStuff@216.157.195.85) left irc: "-=CoTBBS!=- 1989 - Today... telnet://bbs.CoTBBS.org" [04:35] hohum (n=dcorbe@c-71-62-76-68.hsd1.va.comcast.net) joined #openser. [04:46] CrazyTux (n=CrazyTux@64.95.219.140) left irc: Read error: 113 (No route to host) [05:46] CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net) joined #openser. [06:43] CrazyTux (n=CrazyTux@64.95.219.140) joined #openser. [09:02] CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net) left irc: Remote closed the connection [10:16] habakuk (n=chatzill@c-24-6-224-243.hsd1.ca.comcast.net) left irc: "Chatzilla 0.9.77 [Firefox 1.5.0.10/2007021601]" [15:52] L|NUX (n=linux@unaffiliated/lnux/x-10290) joined #openser. [16:13] agranig (n=agranig@83-65-24-161.work.xdsl-line.inode.at) joined #openser. [16:33] Nix (n=Nix@81.213.125.220) joined #openser. [18:12] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: "Leaving" [18:25] Eimann (i=eimann@chaconne.etherkiller.de) left irc: Read error: 101 (Network is unreachable) [18:34] apardo (n=apardo@87.217.145.84) joined #openser. [18:37] apardo (n=apardo@87.217.145.84) left irc: Remote closed the connection [19:09] agranig (n=agranig@83-65-24-161.work.xdsl-line.inode.at) left irc: "Leaving" [20:24] wathst probper calleird setting ? [20:24] From: "BOB" <5556665555> ? [20:29] Eimann (i=eimann@chaconne.etherkiller.de) joined #openser. [20:56] From: "display name" [20:56] check the rfc [21:27] hmm what does looseroute do ? [21:28] 0(4215) after_loose: Topmost route URI: [21:28] so when i send a call to a proxy that sends to a media gw.. i 0(4215) grep_sock_info - checking if host==us: 13==14 && [75.126.46.155] == [209.172 [21:29] meanign i send to 1.2.3.4 but media is 3.4.5.6 [21:29] 0(4215) DEBUG:uac:restore_from: Route param 'vsf' not found [22:20] mainly i get no audios on reinvites [22:31] NormB (n=NormB@24.115.56.68) joined #openser. [22:50] any consultants i need a quote [22:55] osas: Asterisk does it one way and other UAs do it another way [22:55] asterisk peps say the way they do it is the correct way [22:55] peeps [22:55] wel. if i send directly to like L3.. [22:56] then they could use 1 out of 300 ips for media pth [22:56] Bobthehunter: i am having the same exact issue - l3 same here [22:56] and not working [22:56] the reinvitejust doenst swork [22:56] they want to see From: "display name" [22:56] ok back to visio then [22:56] nah i dont care on that i fixed that [22:57] my prob is wen i send them the call.. [22:57] they use a different media ip then the originated ip.. like call to 1.2.3.4 and media is 3.4.5.6 [22:57] how did you fix it ? i cannot seem to get rid of the damn quotes [22:57] so i get no audio [22:57] use rpid [22:57] no go - rpid is the same format as the from [22:57] not sure hten ;) [22:58] it has [22:58] they want the number instead of the authname [22:58] the SDP should contain the proper IP for the media - use it [22:59] no idea why its not [22:59] I use MediaProxy and haven't had a lick of audio problems [22:59] hmm can you send config ? [22:59] use_media_proxy() [23:00] i do [23:00] just need to start my plan from scratch i think [23:00] cause im OSP'ing most of it for LCR and failover [23:00] append_rpid_hf("", ";party=calling;id-type=subscriber;privacy=off;screen=yes"); [23:00] add this [23:04] NormB (n=NormB@24.115.56.68) left irc: "Leaving" [23:06] that still doesn't get the number in place of the authname [23:06] the number comes in under the display name - and the variable has quotes around it [23:07] brb - need to add a HD into this machine [23:08] JerJer (n=PhatJ@pdpc/supporter/bronze/jerjer) left irc: "Leaving." [23:14] JerJer (n=PhatJ@pdpc/supporter/bronze/jerjer) joined #openser. [23:14] ahh giggage [23:22] can you send the config ? [23:22] im sure it can help [23:26] specificaly which config? [23:26] ser.cfg [23:26] lol [23:26] one who has media [23:29] ser doesn't deal with media - it just calls the use_media_proxy at a few points [23:31] Nix (n=Nix@81.213.125.220) left irc: Read error: 110 (Connection timed out) [23:32] yes [23:32] hmm [23:32] nevermind [23:32] im outsourcing this [23:33] i am sanatizing my config [23:34] http://www.pastebin.ca/372227 [23:35] config is for openser v1.1.1 [23:35] that waht i have [23:35] same [23:35] exept 4569 [23:35] ;0 [23:36] let me tyr this out the box and see [23:36] i would like to figure out how to NOT proxy for those clients behind the same NAT, but the crap on the wiki absolutely does not work on v1.1.1 [23:36] that for youtbound right ? [23:36] im requesting a setup anyhow [23:37] with double SER double OSP all failovered and balanced.. with more stuff [23:37] oh god [23:38] I do HA - have two boxes ensuring the same public IP always exists [23:38] then use proxydispatcher and a few media proxy boxes [23:38] reahmm so you need media proxy boxes seperate ? [23:39] but i'm || <--- that close to writing my own 'mediaproxy' application since AG Projects refuses to support their crap [23:39] AG sucks [23:39] i totally agree [23:39] yhey the worst pos to land on earth since the 304 BC meteor [23:39] i'm gonna blog about how much they suck, so the world knows [23:40] i asked for a basic install.. they asked for 25,000$ [23:40] for basic config of theyr app [23:40] lol [23:40] me too [23:40] how about we get agprojectsucks.or [23:40] and i could get the rehan&istrollstoo.com [23:41] Action: Bobthehunter think supertec+agprjects are bad [23:41] gonna try your config and if works then ill try osp 'ing it [23:41] is ag projects and Rehan involved (same company) ??? [23:41] no both suck [23:41] ok - i was gonna say [23:41] thy run on same business model [23:42] rehan keeps putting our DIDs on his didx crap [23:42] exept rehan spams more [23:42] yes i had to block is whole 2 ip block lol [23:42] http://www.virtualphoneline.com/server-status [23:42] how would you trust anyone that lame [23:43] lol [23:43] im pretty sure hes vuln to sql injections and one could easily get all info on users credit card # included [23:43] if i ever get an email from him again im reporting to is credit card merchant [23:43] wouldn't suprize me [23:44] so what/why do you use OSP for ? [23:47] i have always found osp to be a serious amount of bloat for very little benefit [23:47] unless you have partners that require OSP (which we have avoided) [23:48] lcr/failover and fast rerouting in case one term down [23:50] the LCR module doesn't work for you ? [23:53] didnt check yet.. but i doubt.. i dont want to LCR on pricing [23:53] well [23:53] yes i mean lol [23:54] nevermins [23:54] the LCR module docs dont' say anything about pricing [23:54] ah [23:54] ill take a lok [23:54] after i get this refister to work [23:54] have you eyeballed the configuration wizard? [23:55] http://www.jeremy-mcnamara.com/index.php/2007/02/22/seropenser-configuration-wizard/ [23:55] the register works. the invite fails [23:56] back in a few [00:00] --- Mon Feb 26 2007