[00:06] Vulpyne, what do you mean by catch a succesful try? As in the phone was answered and 200 OK? [00:06] Exactly. [00:06] But none of the AVPs I set that were available in failure_route and the main route block are set in the onreply_route. [00:06] I'm trying to figure out how I can pass the state across to that part. [00:06] Vulpyne, the avp's? [00:07] Yeah. It's basically a custom least cost routing application, since the normal OpenSER one isn't sufficient for my purposes. [00:07] So I pull in information from the database. [00:07] Vulpyne, have you looked at onreply_avp_mode ? [00:07] I hadn't, but I will now! [00:08] Vulpyne, http://www.openser.org/docs/modules/1.2.x/tm.html#AEN303 [00:08] Vulpyne, will that work out for you? [00:09] I just tried it and it worked. [00:09] Thank you very much! [00:09] Somehow I missed that when I was looking at the tm module docs. [00:11] Vulpyne, no problem :) [00:16] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) left irc: "Leaving" [00:16] sack_ (n=sack@223.Red-83-33-173.dynamicIP.rima-tde.net) joined #openser. [00:19] sack (n=sack@38.Red-83-50-151.dynamicIP.rima-tde.net) left irc: Read error: 110 (Connection timed out) [00:27] Nick change: DoberMann -> DoberMann[ZZZzzz [01:00] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) joined #openser. [01:01] Vulpyne, still around? [01:09] botanist1 (n=olivier@84-74-187-120.dclient.hispeed.ch) joined #openser. [01:09] botaniste (n=olivier@84-74-187-120.dclient.hispeed.ch) left irc: Read error: 104 (Connection reset by peer) [01:46] Hows everyone doing this evening. [01:46] cypromis (n=michal@host213-123-136-142.in-addr.btopenworld.com) joined #openser. [01:46] good [01:49] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [02:43] brettnem (n=brettnem@72.29.102.158) left irc: Remote closed the connection [02:43] brettnem (n=brettnem@72.29.102.158) joined #openser. [03:07] CrazyTux (n=CrazyTux@64.95.219.140) left irc: SendQ exceeded [03:08] CrazyTux (n=CrazyTux@64.95.219.140) joined #openser. [03:40] crazy: Slightly. [03:40] What's up? [03:41] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) left irc: Connection timed out [04:37] CrazyTux (n=CrazyTux@64.95.219.140) left irc: SendQ exceeded [04:38] CrazyTux (n=CrazyTux@64.95.219.140) joined #openser. [04:57] Loady (n=lasse@noc.mtulink.no) left irc: Read error: 104 (Connection reset by peer) [05:32] Loady (n=lasse@noc.mtulink.no) joined #openser. [06:35] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) joined #openser. [06:38] L|NUX (n=linux@unaffiliated/lnux/x-10290) joined #openser. [06:54] dhakatel (n=root@58.65.224.5) joined #openser. [06:55] dhakatel (n=root@58.65.224.5) left #openser. [06:55] dhakatel (n=root@58.65.224.5) joined #openser. [07:03] can you tell me which one will perform better [07:03] openser with SEMS [07:03] openser with astarisk [07:04] I want to know about the performance of SEMS [07:04] for an unspecified application, cool [07:04] I want to use SEMS of call center solution [07:05] *for [07:06] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: Connection reset by peer [07:13] _0penser_ (n=Administ@58.65.224.5) joined #openser. [07:23] L|NUX (n=linux@unaffiliated/lnux/x-10290) joined #openser. [07:26] CrazyTux (n=CrazyTux@64.95.219.140) left irc: SendQ exceeded [07:27] CrazyTux (n=CrazyTux@64.95.219.140) joined #openser. [07:27] codestr0m (n=asura@207.135.120.85) joined #openser. [07:48] Chris-NB (n=chris@ng1.kurtkrenn.com) joined #openser. [07:56] _VoiceMeUp_COM (n=_VoiceMe@145-27.mc.cite.net) left irc: "Im out" [08:07] CrazyTux (n=CrazyTux@64.95.219.140) left irc: Read error: 104 (Connection reset by peer) [08:10] CrazyTux (n=CrazyTux@64.95.219.140) joined #openser. [08:12] bblack (i=bblack@38-118-35-20.rapiddsl.net) left irc: Read error: 110 (Connection timed out) [08:32] hwaastad (n=hwaastad@084202200040.customer.alfanett.no) joined #openser. [08:32] hwaastad (n=hwaastad@084202200040.customer.alfanett.no) left #openser. [08:40] stimpie (n=michiel@ip565faf27.direct-adsl.nl) joined #openser. [08:58] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: Read error: 104 (Connection reset by peer) [09:00] Nick change: DoberMann[ZZZzzz -> DoberMann[PullA] [09:15] Nick change: sack_ -> sack [09:27] Nick change: DoberMann[PullA] -> DoberMann [09:30] DanB (n=dan@87.139.12.167) joined #openser. [09:31] Morning Folks! [09:32] Morning! [09:34] L|NUX (n=linux@unaffiliated/lnux/x-10290) joined #openser. [09:36] Good morning everyone [09:36] DanB, hows things going. [09:39] Hi CrazyTux: thxs, moving forward ;-) [09:41] DanB, Do you have NAT handling working ok on openser 1.2? [09:41] DanB, I'm still having the issues, I was working with Daniel on it, but still haven't figured it out [09:52] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: Read error: 113 (No route to host) [09:55] codestr01 (n=asura@207.135.120.85) joined #openser. [09:56] Nix (n=Nix@81.213.125.220) joined #openser. [09:56] codestr0m (n=asura@207.135.120.85) left irc: Nick collision from services. [09:56] Nick change: codestr01 -> codestr0m [10:00] CrazyTux: my NAT handling works fine for me on 1.2 [10:10] DanB, can you give me an example I can take a look at [10:10] DanB, for some reason my flags arent matching up against what is in the config, database, and what is executed... [10:16] DanB, I'm wondering if it has something to do with my env setup, any ideas? [10:16] CrazyTux: Sorry I will leave now, but be back in half an hour [10:16] DanB, ok, catch ya then :) [10:17] stimpie (n=michiel@ip565faf27.direct-adsl.nl) left irc: "Leaving" [10:17] L|NUX (n=linux@unaffiliated/lnux/x-10290) joined #openser. [10:22] DoberMann_ (n=james@AToulouse-156-1-177-126.w90-38.abo.wanadoo.fr) joined #openser. [10:23] DoberMann (n=james@AToulouse-156-1-18-183.w86-196.abo.wanadoo.fr) left irc: Read error: 110 (Connection timed out) [10:36] CrazyTux: it is hard for me to read your configuration ... I have the feeling there is something which u are not doing properly [10:36] DanB, I took the default conf for 1.2 and rtp from the wiki [10:36] ok, can u post it once again somewhere? [10:37] sure [10:38] DanB, give me just a second [10:42] DanB, internet is being real slow right now, going pastebin'ing right now [10:43] DanB, http://papernapkin.org/pastebin/view/5736 [10:47] CrazyTux, you have disable rtpproxy , why = [10:48] sack, ? [10:48] #modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7890") [10:48] sack, I have the rtpproxy_sock modparam commented out [10:48] sack, that is so it looks for the sock rather than forcing it [10:49] ummm so docs are wrong ? " Default value is "NONE" (disabled). " [10:50] sack, wheres it say that in docs? [10:50] sack, http://www.openser.org/docs/modules/1.2.x/nathelper.html#AEN131 [10:50] http://www.openser.org/docs/modules/1.3.x/nathelper.html#AEN140 [10:51] sack, thats 1.3 [10:51] well it depends ... i'm using svn version ... so i guess that is 1.3 [10:51] ok , sorry i thought you were using svn version [10:51] sack, I was then I reverted. [10:52] but weird change between 1.2 and 1.3 [10:54] CrazyTux, so you issue is the incomming call from PSTN , right ? [10:54] sack, correct [10:54] _your_ [10:55] Do you have logs about any call ? [10:55] sack, the call comes in [10:55] sack, just no audio [10:56] ok ... but the issue could be rtp nat translation or no matching transaction even others [10:56] maybe ngrep could help you [10:56] sack, I posted a sipcap, looks like SDP negotation is off. [10:57] sack, but I dont see what I'm missing [10:57] can i see that sipcap post ? [10:57] sack, sure one second making a new one [10:58] sure [11:00] sack, http://papernapkin.org/pastebin/view/5739 [11:01] sack, look around line 192 [11:01] sack, starts at 170 OpenSER -> Gateway [11:01] btw could you hear the ring ? [11:02] sack, yes both ways [11:02] ok [11:03] sack, see anything funny? [11:03] ummm not sure .... [11:04] i saw a SUBSCRIBE ... weird [11:05] line 303 [11:05] sack, yea the ATA is just sending those [11:05] sack, AFAIK nothing to do with the nat and RTP [11:06] DanB, still here? [11:08] yeah: it looks like your rtpproxy doesn't work at all ... u should have the invite modified, but it is sent same as original to your client... [11:08] DanB, thats what I see too, but what is causing this, and whats the fix [11:09] it should be something wrong with the communication with the rtp proxy [11:09] DanB, Incoming call: -------branch=0, branch flags=00000040 [11:09] DanB, force_rtp_proxy2: incorrect port 0 in reply from rtp proxy [11:09] DanB, syslog output [11:09] can u place a xlog after line 100 [11:10] saying? [11:11] xlog("The nat was properly detected and branch flag was set to 6"); [11:11] one sec, I've got another idea [11:12] DanB, sure thing :) [11:12] _0penser_ (n=Administ@58.65.224.5) left #openser. [11:14] DanB, I tried the xlog too btw and it printed out. [11:14] DanB, The nat was detected and the branch flag was created: -------branch=0, branch flags=00000000 [11:14] DanB, yet in the DB is says for cflags '64' [11:15] k, so at least we know your alias was matched [11:15] DanB, -------branch=0, branch flags=00000040 is when I call, the branch flag. [11:17] DanB, did you have any of these problems I'm having? [11:17] CrazyTux: I never have problems ;-) [11:17] DanB, lol, think you can help me get this sorted :) [11:19] DanB, could it have something to do with the 64 bit arch? [11:20] CrazyTux: you should know that everybody get issues, that's the charm of opensource, don't know yet the cause, let's look further [11:20] DanB, Alrighty :) [11:22] DanB, where should I go from here? :) [11:22] can u place a xlog line after 152 [11:22] inside of the } [11:22] route[2] inside of that? [11:23] xlog("Trying to force rtpproxy"); I have line 152 in route 3, after forcing rtpproxy [11:24] DanB, /usr/local/sbin/openser[14420]: Trying to force rtpproxy [11:24] DanB, /usr/local/sbin/openser[14420]: -------branch=0, branch flags=00000040 [11:24] thats on incoming call. [11:27] k, so it looks definetly a rtpproxy issue, your openser config is proper... [11:27] DanB, but dosent the sipcap look invalid? [11:28] can some one tell me what is P-Asserted-Id ? [11:28] in the sipcap u have posted, line 72 should be the ip of your rtpproxy, based on forcertpproxy function u are using... [11:29] dhakatel, its the newer Remote-Party-ID: [11:29] DanB, so that still is an RTPproxy issue? [11:29] CrazyTux: this is my oppinion [11:29] now, where is rtpproxy located, and how did u started? [11:30] DanB, /usr/local/bin/rtpproxy [11:30] DanB, I normally just do "rtpproxy &" [11:30] DanB, for time being [11:30] so, on the same machine... [11:30] how can I insert P-Asserted-Id in invite message [11:30] DanB, correct [11:30] DanB, however the Gateway is using RTPproxy too [11:30] DanB, not sure if that has any effect? [11:31] CrazyTux: it should not' [11:31] _0penser_ (n=Administ@58.65.224.5) joined #openser. [11:31] CrazyTux: can u run rtpproxy in foreground and see if you get any request from openser? [11:31] r_open (n=Administ@69.88.13.17) joined #openser. [11:32] DanB, whats the option to run in foreground? [11:32] I am not using rtpproxy, so I am not so familiar with it... [11:32] I am using mediaproxy [11:33] DanB, when I start openser it says.. [11:33] DanB, /usr/local/sbin/openser[14523]: rtpp_test: RTP proxy found, support for it enabled [11:35] anybody here using rtpproxy? [11:36] DanB, found it -f [11:37] stop the old rtpproxy and then start a new process in the foreground [11:37] see if you get anything when call coms in [11:38] DanB, negative [11:38] what's negative? [11:38] DanB, nothing. [11:38] DanB, negative = no [11:39] DanB, nothing came through, or atleast to foreground [11:40] what is your rtpproxy configuration? [11:41] DanB, just default out of box [11:42] i've done a test running in foreground and rtpproxy starts a new session with RTCP port [11:42] sack, on incoming call? [11:42] CrazyTux, no ... outgoing [11:43] DanB, oh one thing I forgot to mention [11:43] sack: this is what I trying to explain, that openser doesn't communicate with rtpproxy even if forcertpproxy is called [11:43] DanB, My outgoing calls are fine [11:43] DanB, only incoming is messed up [11:43] ok ... let me test outgoing call [11:43] can u post one outgoing call trace? [11:44] DanB, sure one second [11:44] DanB, sipcap right? [11:44] right [11:45] DanB, 1 minute, doing now. [11:48] DanB, http://papernapkin.org/pastebin/view/5743 [11:48] DanB, thats an outgoing call [11:55] DanB, SDP negotation is fine, and the call works fine... [11:55] DanB, I dont get why incoming would be different? [12:05] CrazyTux: I cannot see where is the routing for the outgoing calls in your configuration [12:05] DanB, I am using a diff config, for that... [12:06] :-) [12:06] DanB, but it is still RTPproxy and 1.2 [12:06] DanB, I dont see why it'd differ ? incoming dosent work, outgoing does. [12:07] u have to think: what is different [12:07] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) left irc: Read error: 110 (Connection timed out) [12:07] DanB, hmmmm [12:07] DanB, can I show you the conf I'm using in priv? [12:08] where are you using this configuration? is it on different machine, or the same? [12:08] DanB, same machine [12:08] DanB, basically doing mv openser.cfg openser.cfg.bk and mv openser.cfg2 openser.cfg openserctl retart [12:08] s/retart/restart/ [12:09] so, u are not touching rtpproxy? [12:09] on the same machine... [12:09] correct [12:10] ok, so it should be something with the config then [12:10] DanB, can I pm you real quick? [12:10] k [12:16] DanB, get my messages? :) [12:16] yeah [12:43] CrazyTux: it could be that rtpproxy doesn't process your request due to a=nortpproxy:yes. atribute in sdp [12:43] DanB, should I strip that header? [12:44] DanB, or what can I do about it [12:44] DanB, did you take a look at the other conf [12:45] try changing nathelper params with the line in the example> modparam("nathelper", "nortpproxy_str", "a=sdpmangled:yes\r\n") [12:45] and then try again [12:45] I go off now for lunch, will be back [12:46] DanB, alrighty [12:50] DanB, that didnt seem to work :( [12:55] L|NUX (n=linux@unaffiliated/lnux/x-10290) left irc: Read error: 104 (Connection reset by peer) [13:04] DanB, I think you're on to something though [13:06] CrazyTux, FYI i have sipping_bflag and sipping_from commented out [13:07] sack, do you have the incoming working? [13:07] i cannot tested :-/ [13:08] but i will do this noon ( GTM+2 ) so in few hours ( 5 or so ) [13:08] i'll let you know :) [13:08] sack, alright thank you [13:09] cypromis (n=michal@host213-123-136-142.in-addr.btopenworld.com) left irc: [13:09] np problem , btw i'm using 1.2.x svn [13:10] Revision: 2095 / https://openser.svn.sourceforge.net/svnroot/openser/branches/1.2 [13:11] CrazyTux: then try this one: modparam("nathelper", "nortpproxy_str", "") [13:12] DanB, check out force_rtp_proxy "f" flag [13:12] DanB, http://www.openser.org/docs/modules/1.2.x/nathelper.html#AEN289 however SDP still dosent seem to be rewritten [13:14] hmm, this could be a good reason... [13:14] can u post me your rtp_proxy configuration? [13:15] DanB, I have no specific conf, or do you mean modparam? [13:15] DanB, All I do to run it is 'rtpproxy &; [13:16] ok, so rtpproxy has no configuration generally? [13:16] DanB, you can set where it listens to and stuff but, no [13:16] DanB, nothing crazy [13:20] CrazyTux: k, let's do another attempt: please add the following param after 152 (force_rtp_proxy): append_hf("P-hint: RTPProxy Used\r\n"); and then post your new configuration as well as log detail for one call... [13:21] logdetail> sipcap [13:21] DanB, using the conf I pm'ed you? [13:22] DanB, the new conf? line 152 is far from force_rtp_proxy [13:23] remember I asked u to put a line with xlog after forcing rtpproxy? [13:23] DanB, on the first configuration correct? [13:25] ok, on the original configuration, add the modparam("nathelper", "nortpproxy_str", "") and after 152 append_hf("P-hint: RTPProxy Used\r\n"); [13:25] ok [13:25] and then restart your openser [13:25] post me the new config, for references, as well as the sipcap for a call [13:27] DanB, ok one min [13:32] DanB, ok, I have a bit of news. [13:32] DanB, I just tried with another PSTN that dosent RTP proxy.... and it works perfectly. [13:33] DanB, so how can I just simply disable an rtpproxied call... [13:42] it is your call, but if you wat me to further help u, post me the info I asked... [13:44] if u want to disable the rtpproxy, just comment out the line with force_rtp_proxy() [13:44] DanB, I mean from the Gateway though [13:44] DanB, how can I disable theirs [13:44] DanB, give me ~ 3 mins while I get you that info [13:44] DanB, have to change some things back [13:44] I think the best way is sending them an e-mail :-) [13:45] DanB, the GW is another server of mine... [13:45] DanB, using openser. [13:45] DanB, I treid unforce_rtp_proxy() when routing out but it dosent seem to work [13:46] I guess I need to double check my routes [13:52] NormB (n=NormB@smoothwall.goes.com) joined #openser. [14:09] DanB, got it working :) [14:09] DanB, thank you very much for that tip nortpproxy [14:09] DanB, was causing it to not process. [14:10] DanB, howeveer I need to research more on RTP bridging apparently [14:10] r_open (n=Administ@69.88.13.17) left #openser. [14:12] CrazyTux: I am happy then u got it working... cheers [14:12] DanB, thank you very much, you have no idea :) [14:24] DanB, ok, one issue... when PSTN hangs up, it's sending bye to 192.168.1.* it's not rewriting contact only for BYE [14:25] DanB, this is on the conf I privately showed you [14:44] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [14:48] cypromis (n=michal@87-194-69-156.bethere.co.uk) joined #openser. [14:49] codestr0m (n=asura@207.135.120.85) joined #openser. [14:54] stimpie (n=michiel@ip565faf27.direct-adsl.nl) joined #openser. [15:02] DanB, still around here? [15:03] yeah, still here [15:03] can u provide me a sipcap of a complete call, including the BYE? [15:03] DanB, for some reason, its not handling the contact header right with fix_nated_contact() now, on BYE from PSTN outgoing. [15:03] DanB, sure one second [15:06] DanB, http://pastebin.ca/465566 [15:07] DanB, starting at line 295 [15:07] PSTN BYE -> OpenSER. OpenSER sends BYE to (invalid internal IP) [15:08] PSTN sends BYE to the contact in INVITE [15:08] so this one is wrong [15:10] DanB, so fix_nated_contacts() isn't being called on Invite? [15:11] DanB, that fixed it [15:12] what fixed it? [15:12] DanB, if(is_method("INVITE")){ fix_nated_contact(); } [15:12] ok, so it works now? [15:12] DanB, yea [15:12] ok, then u did good job today ;-) [15:12] DanB, thanks for the help :) [15:13] k, np [15:23] Nick change: fulgas -> FuL|OUT [15:23] Nick change: FuL|OUT -> fulgas [15:24] Nick change: fulgas -> FuL|OUT [15:25] dhakatel (n=root@58.65.224.5) left irc: "Download Gaim: http://gaim.sourceforge.net/" [15:26] quit [15:52] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) joined #openser. [16:01] _0penser_ (n=Administ@58.65.224.5) left #openser. [16:03] Defraz_ (n=t0tal@24-116-152-177.cpe.cableone.net) joined #openser. [16:06] Defraz (n=t0tal@fw.fuzecore.com) left irc: Read error: 104 (Connection reset by peer) [16:33] Chris-NB (n=chris@ng1.kurtkrenn.com) left irc: Read error: 113 (No route to host) [16:52] cayorde (n=flexable@host184-111-dynamic.17-87-r.retail.telecomitalia.it) joined #openser. [17:14] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [17:18] codestr0m (n=asura@207.135.120.85) joined #openser. [17:20] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [17:28] sangee (n=rkuru@206.191.114.66) joined #openser. [17:37] did anybody see this error before? error: couldn't retrieve DNS SRV record '_mediaproxy._tcp.domain.com': Timeout [17:38] i didn't use mediaproxy yet [17:39] DanB, i maybe you can check your DNS server to see if is working fine [17:40] http://dnsreport.com/ could help you [17:40] CunningPike (n=CunningP@204.239.8.149) joined #openser. [17:40] yeah, I have checked this one [17:41] http://www.dnsstuff.com/tools/lookup.ch?name=SET_HERE_YOUR_DNS&type=SRV [17:41] my dns works fine, but I think the primary dns I have asked was not working, cleared now [17:41] I use dig to check my srv, I have even programed my own tool for srv checks [17:42] ok ok ... [17:42] yeah dig rules [17:42] yes, but very strange, dig was providing proper records, but mediaproxy was complaining about timeout [17:43] DanB, ummm maybe mediaproxy uses a kind of cache ... [17:45] imediatelly after I have commented out the default dns servers in my resolf.conf, and put in only one, it worked ... [17:45] nice [17:48] yeah, but I this something is wrong in mediaproxy checks then [17:50] codestr0m (n=asura@207.135.120.85) joined #openser. [18:04] codestr01 (n=asura@207.135.120.85) joined #openser. [18:20] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [18:25] is there any way to recompute UDP checksum, because openser does not seem to re-calculate it after inserting an x-nt-location field ? [18:47] codestr0m (n=asura@207.135.120.85) joined #openser. [18:53] codestr0m (n=asura@207.135.120.85) left irc: Remote closed the connection [18:58] codestr0m (n=asura@207.135.120.85) joined #openser. [19:03] codestr01 (n=asura@207.135.120.85) left irc: Read error: 110 (Connection timed out) [19:05] Nick change: DoberMann_ -> DoberMann[PullA] [19:21] Defraz_ (n=t0tal@24-116-152-177.cpe.cableone.net) left irc: "Trillian (http://www.ceruleanstudios.com" [19:40] brettnem (n=brettnem@72.29.102.158) left irc: "Disconnecting from stoned server." [19:41] brettnem (n=brettnem@72.29.102.158) joined #openser. [19:43] sack, how did the tests go? got the rtp handling working with danb's help :) [19:54] stimpie (n=michiel@ip565faf27.direct-adsl.nl) left irc: "Leaving" [19:54] Nick change: DoberMann[PullA] -> DoberMann [20:03] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) left irc: Connection timed out [20:10] unspin (n=unspin@24.82.161.85) joined #openser. [20:29] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) joined #openser. [20:34] cypromis (n=michal@87-194-69-156.bethere.co.uk) left irc: [20:36] brettnem (n=brettnem@72.29.102.158) left irc: Remote closed the connection [20:36] brettnem (n=brettnem@72.29.102.158) joined #openser. [20:37] Defraz (n=t0tal@fw.fuzecore.com) joined #openser. [20:43] If I use subst_uri to rewrite the URI, the changes I make aren't reflected in variables such as $tU. Is there any way to refresh those variables so they see the changes? [20:47] Vulpyne: did u try avp write? [20:48] avp_write was removed in 1.2.x, wasn't it? [20:49] I don't really understand how I would use that, though. [20:49] My problem is that I rewrite the URI, but the variables don't reflect the changes I made. [21:03] CrazyTux[m] (n=CrazyTux@cpe-24-162-48-94.houston.res.rr.com) left irc: Connection timed out [21:03] DanB (n=dan@87.139.12.167) left irc: Remote closed the connection [21:46] codestr0m (n=asura@207.135.120.85) left irc: Read error: 110 (Connection timed out) [22:02] _VoiceMeUp_COM (n=_VoiceMe@145-27.mc.cite.net) joined #openser. [22:12] codestr0m (n=asura@207.135.120.85) joined #openser. [22:51] wow ... lots of new stuff in cvs head :-) [22:52] yeah. that would be amazing.. isn't it set to read-only and we're using svn now? ;) [22:52] cypromis (n=michal@host213-123-136-142.in-addr.btopenworld.com) joined #openser. [23:10] Nix (n=Nix@81.213.125.220) left irc: "sleep" [23:32] cayorde (n=flexable@host184-111-dynamic.17-87-r.retail.telecomitalia.it) left irc: Read error: 104 (Connection reset by peer) [00:00] --- Tue May 1 2007